Rub-R-Walls of Michigan, Inc.

Rub-R-Wall demonstration Rub-R-Wall® Plus Waterproofing has great tensile strength and does not require protection board prior to backfilling. It is also offered with a limited, lifetime warranty on new residential foundations.

Environmentally Friendly. The Rub-R-Wall membrane is non-toxic and can’t leach into our ground water.

*For vertical residential foundation walls when applied by a Certified Rub-R-WalI Applicator.
certain restrictions apply. Call or write for a Sample Warranty.

Rub-R-Wall Plus is the preferred, cost- effective waterproofing solution for industrial, commercial and residential applications. Plus’s impact and puncture resistance exceed that of protection boards and eliminate board slippage during backfill.

Rub-R-Wall is recommended where exterior insulation or drainage panels are specified or required by code.

Rub-R-Wall and Plus have been specified by architects and builders on more than 50,000 projects around the world since 1989.

The Plus Advantage:

For Applications Without Protection Board

Plus has the performance and elastomeric properties of Rub-R-Wall Waterproofing proven on jobs around the world.

Plus is much stronger and tougher to resist backfill and settlement damage, even abuse from gravel shooters.”

Plus has improved UV resistance, for up to 60 days exposure before backfilling.

LIFETIME LIMITED WARRANTY* - Rubber Polymer Corporation provides a lifetime limited warranty on new residential foundations.
CERTIFIED APPLICATION- Rub-R-Wall is applied only by certified applicators to assure the highest quality installation.

DURABILITY- Independent laboratory tests show a projected life expectancy of more than 100 years for Rub-R-Wall, even when constantly exposed to water.

COMMERCIAL APPLICATION- Rub-R-WaIl has been specified and used by architects for jobs ranging from tunnels to white tiger habitats.

TOUGHNESS- The rubber polymer of Rub-R-Wall provides a tough membrane designed to resist abuse.
COST EFFECTIVENESS- The Rub-R-Wall System provides the most cost-effective protection of any high-performance
waterproofing.
Rub-R-WaII PROVEN SYSTEM- Rub-R-Wall has been installed on thousands of residential and commercial jobs since 1989. The result? UNSURPASSED PERFORMANCE.
ELASTICITY- Rub-R-Wall is incredibly elastic (over 1,800 percent elongation) to bridge shrinkage cracks.
ADHESION- Rub-R-Wall is formulated to adhere tenaciously to cementitious surfaces. Rub-R-Wall holds protection or drainage boards tightly without mechanical fasteners.

PRODUCT SPECIFICATIONS

COMPOSITION: Hydrocarbon polymers in hydrocarbon solvents, applied membrane
COLOR: Blue-green
DENSITY: 6.8 - 7.8 lbs. / gal.
MINIMUM TEMPERATURE FOR APPLICATION: 15 F
APPLICATION: Airless spray
APPLICATION RATE: Block 20-27 sq. ft./gal. Poured walls or parged block 25-35 sq. ft./gal.

PROPERTY	TEST METHOD	TYPICAL RESULT FOR Rub-R-WaII®PLUS
Elongation	ASTM D412 (die C)	1,000+percent
Low-Temperature Flexibility	Bend around 0.5 inch mandrel	Flexible to -30˚F
Abrasion Resistance	700 psi on .06” X .06” point moving 1” per sec	Less than 0.10 percent membrane loss
Dynamic Impact Resistance	CGSB 37-GP-52M Section 7.2.10	Passes at 23CC; Passes at -l0
100 Degree Peel Adhesion	Metal plate	18 lb. / inch
Crack Bridging	ASTM 836	Exceeds ten cycles to 1/8 inch at -15˚F
Water Vapor Permeance	ASTM E96 (water method)	0.21 perms for 40-mil dry coating grams / ft2 / hr. in Hg
Liquid Water Absorption	ASTM D95	Less than 0.5 percent (weight)
Resistance to Bacteria	ASTM D4299-83 (modified)	No attack
Resistance to Degradation in Soil	ASTM El 54 (soil preparation)	Excellent
Resistance to Algae	ASTM G29-75 (modified)	No attack
Resistance to Fungus	ASTM D2020 (modified)	No attack
Resistance to Chemical Attack	Visual	Unaffected by chemicals in concentrations typically found in soils
Solvent Resistance	Visual	Exceeds performance of modified asphalts
Life Expectancy	Arrhenius projection theory	Exceeds 100 years

Rubber Polymer Corporation Innovations in Moistur

Thank you for visiting Fenton

Home | Rub-R-Wall | Watch Dog

Send mail to info@fentonpouredwalls.com. Sales: Guy B. Pickhover, Phone: 810.629.5265, Fax: 810.629.5300
Copyright © 2007-2010 Fenton Poured Walls, Inc. All rights reserved. Last modified: 10/29/11
Website support by Setup Solutions LLC. www.SetupSolutions.net